Metal Detector
　　If any metal piece is contained in the filled bags, drums or boxes, the buzz & indicating light in the local panel shall immediately alarm or send signal to the Sorting Device to reject the incorrect bag out of the Line , & also the unit is interlocked with the other units in the system.

　　Type: Flat belt conveyor with metal detecting head
　　 Conveying speed:adjusted by Invertor
　　 Belt length: Normal 1200mm (depending on the size of box, drum or bag)
　　 Belt width: 500mm～700mm (depending on the size of box, drum or bag)
　　 Detecting accuracy: Fe ≤ 2.0mm 　Non-Fe ≤ 3.0～3.5mm. (304ss&Cu).
　　 Detecting Height: 200mm～500mm (depending on the size of box, drum or bag)
　　 Drive motor: 0.4Kw
　　 Enclosure grade: IP65

Weight Checker
　　As the filled bags pass through the Weight Checker, the bags over/under weight shall be noticed on signal, the buzz & indicating light alarm & the incorrect signal will be sent immediately to the Bag Sorting Device which rejects the incorrect bag out of the Line.
　　Model: NWWC1200
　　Structure: Belt conveyor & weight checking unit
　　Zone of Indecision (setting Interval): 0～±200g
　　Weighing accuracy: 0～±10grams
　　Weight checking speed: ≥ 200～2000bags/hr
　　Classification: 3 categories (under/correct/over)
　　
　　Conveying speed: Normal 16m/min (speed adjusted by Inverter)
　　Drive motor: 0.4Kw
　　Power consumption: Approx 0.5Kw, 380v/220v, 500Hz
　　Accessories: Printer (optional, a interface in the Weighing Controller Indicator could be connected directly with the DSC to store
the data in memory
)