Neweigh automatic weighing & packaging machinery factory---PACK, WEIGHTING MACHINE,WEIGH PALLETIZE,WEIGHING LINE PACKING LINE

　　Changzhou Neweigh Automatic Weighing & Packaging Machinery Factory sincerely supplies the excellent weighing & packaging system for customers both domestic and abroad. Before inquiring and ordering, please offer the information or descriptions of packaging bag, processing material and production capacity as follows(please fill√into show confirmation or describe in words in)

Company：		Address：
P.C.：		Fax：
Tel：		Person in charge：
E-mail：		Website：

1. Packaging Bag Type & Size

　　a. Packaging Bag Type:

　　Open Bag Wi-polygon Straight Polygon Valve Orifice Bag

　　b. Packaging Bag Size

　　Open Bag Size:

　　Length × Breadth × Thickness (aiming at gusseted bag))

　　Length × Breadth (aiming at straight side bag)

　　Valve Bag Size:

　　Length × Breadth × Nozzle Diameter

c. Packaging Bag Material:

　　a．PP Woven Bag

　　b．PP Woven Bag with inner PE Film bag Q'ty of Internal-lined Layers of Inner Bag pcs thickness per layer mm

　　c．PP Woven Bag with inner film lamination Monolayer Thickness

　　d．PP or PE Plastic Bag Monolayer Thickness

　　e．Kraft paper Bag Multi-layer Bag thickness per layer

　　f．Kraft with inner film lamination Monolayer Thickness

　　g．Packaging Bags with Other Materials

Please outline:

3. Sealing Requirements of Bag

　　a. No Bag Mouth Folding, Directly Stitching with Thread

　　b. Folding and stitching with Thread

　　c. Over-Crepe the Bag Mouth & Stitch with Thread

　　d. Over Taping the Bag Mouth with Hot-melt Adhesive after Trimming and Stitching the Bag Mouth with Thread

　　e. Directly Heat-Sealing the Bag Mouth (aiming at PP or PE Bag)

　　f. Stitching the Outer Bag with Thread after Heat-Sealing the Inner PE Bag

　　——The inner bag sealing has 2 basic methods :

　　① ——The operator shall previously flatten the inner bag mouth manually,insert the bag top into the heat-sealer,& then manually press the inner bag into the outer bag after the inner bag heat sealing being accomplished .

　　② ——The inner bag heat-sealing,outer bag mouth folding & stitching shall be accomplished fully automatically , without any support by manual.

　　——The inner bag should be vacuumized. 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　

　　——The inner bag should not be vacuumized.　　　　　　　　　　　　　　　　　　　　　　　　　　　　　

　　——The outer bag mouth should be folded. 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　

　　——The outer bag mouth should not be folded.　　　　　　　　　　　　　　　　　　　　　　　　　　　　

　　——The outer bag should be heat-sealed again with hot-melt adhesive crepe after the stitching.　　　　　　

　　——The outer bag should not be heat-sealed again with hot-melt adhesive crepe after the stitching. 　　　　　

　　g．Other Sealing Requirement:

Please specity the details here in:

4. Handled Material

　　a．Name

　　b．Densisty:Actual Densisty kg/m³　Bulk Densisty kg/m³

　　c．material shape:

　　——Granular Material Circle Circular Cylinder Diamond Semicircle Other Abnormal Shapes Size mm

　　——Lump or Flake Material Approximate Size mesh

　　——lump or flake Material Approximate Size mm

　　d．Water Content

　　e．Fluidity: Excellent Good Common Poor

　　f．Cohesion:None Tiny Little Strong Very Strong

　　g．Corrosive:PH None Tiny Little Strong Very Strong

　　h．Repose Angle:

　　i．Flammability: No Yes Strong

　　j．Explosibility: No Yes Strong

5.Weight/Bag: kg

6.Weighing accuracy: ± g/Bag

7.Weighing & Packaging Speed:≥ Bag/hour

8.Project Conditions:

　　Instrumental Air: Mpa

　　Power Supply: Kw Hz Phase wire

9.Space & Floor Size on Jobsite

　　Length m，Width m，

　　Height from the Upstream Flange or bottom to the Ground m，Height from the Ground m

　　To select all equipments or partial unit quipments the fully automatic production line, please refer to “Illustration to the Full-automatic Weighing , Packaging & Palletizing System

　　We shall design and submit to you the most economical ,suitable,& operation-stable Technical Specification as soon as possible after receiving the above data.